Two orthogonal axes

high accuracy, temperature compensated

high resistance to vibrations

precision internal accelerometer

Build in precision accelerometer allows to measure angles

(in two axes) in relation to earth with high accuracy. Unit is

equipped with software offset registers, which enable

setting of relative zero position. This feature eliminates

assembly errors, and allows user to measure difference

between independent positions. Inclinometer measures

angles in two orthogonal axes. Embedded temperature

sensor measures ambient temperature of accelerometer,

which allows to compensate its flow to angle measurement

accuracy. Additionally temperature can be read as third

measurement channel.

Due to its tight aluminum housing, unit has high resistance

to environmental conditions and mechanical damages.

Typical applications

- Two measurement channels,

- Build-in temperature sensor,

- Resistance for mechanical damages,

- Aluminum housing.

Supply: 10 - 36V DC
Current consumption: 10 mA / 24VDC
Measurement channels (axes): 2
Measurement range: ±70 deg. in relation to earth
Measurement unit: any (factory scaled to degrees)
Measurement resolution: from 0,001 to 1, user configured
Measurement accuracy: ±30 deg. (better than 0,2%; max. error 0,05 deg. @25°C)
±70 deg. (better than 0,5%; max. error 0,2 deg. @25°C)
Nonlinearity: ±0,1%
Compensation range: -40°C ÷ 85°C
Vibration frequency: higher than 10Hz
Operation temperature: recommended -30°C to +60°C
max. -40°C to +85°C
Communication interface: RS-485, Modbus RTU
Housing material: aluminium
Dimensions: 79 x 74 x 58 mm
Mass: 350 g