Current Excess Sensor

This is designed for signaling the flow of power

current for indust

SCP-10

current excess sensor

complete electrolytic separation

outputs secured against overload

wide range of operating temperatures

SCP-10 module rial automation in AC and DC circuits with

a specified direction of current flow. It facilitates the

detection of failures such as: fuse blowing, failure of

heaters, disconnection of one of the phases feeding the

engine, etc. The application of the sensor of magnetic field

in the semi-conductor module provides for the complete

electrolytic separation of the measuring circuit from the

output system (signaling). The built-in security of the

signaling output protects the system against damage due

to e.g. contact of clamps.

SCP-10 module has been made of components with

extended range of operating temperatures.

SIMEXR

- Secured signaling output,

- AC and DC current detection,

- Magnetic field detector,

- Complete electrolytic insulation of the measurement

circuit from the signaling system.

SMC-200 Data Controller

SMC-200

Is dedicated controller operating FBWC

and WDR systems

STANDBY mode of low power consumption

output secured against overload

wide range of operating temperatures

assembled on TS35 strip

SMC-200 controller is designed for operating FBWC and WDR systems,

however it can be also applied in any operating

systems. The special quality of the device is the "STANDBY"

mode, in which all analogue measurements are periodically

taken while power consumption remains very low.

SMC-200 controller has been made of components with extended range

of operating temperatures.

The driver comprises:

- 16 digital inputs secured against overvoltage,

- 16 digital outputs of open collector type secured against

exceeding the permissible current,

- 2 inputs of temperature sensors of Pt100 type,

- 1 semi-conductor input of temperature sensor,

- 2 current inputs,

- 2 voltage inputs,

- a voltage converter which increases voltage below 24V to the

level of 24V.

On the front panel the controller features two LEDs which

indicate the mode of operation and signal errors in the control

process.

SIMEX

SMC-200-10 - operating FBWCC systems

SMC-200-20 - operating FBWCP systems

SCC-77 Time Controller

The SCC-77 is a general application timer. The timer's

Dual axis inclinometer SCK-10

Two orthogonal axes

high accuracy, temperature compensated

high resistance to vibrations

precision internal accelerometer

Build in precision accelerometer allows to measure angles

(in two axes) in relation to earth with high accuracy. Unit is

equipped with software offset registers, which enable

setting of relative zero position. This feature eliminates

assembly errors, and allows user to measure difference

between independent positions. Inclinometer measures

angles in two orthogonal axes. Embedded temperature

sensor measures ambient temperature of accelerometer,

which allows to compensate its flow to angle measurement

accuracy. Additionally temperature can be read as third

measurement channel.

Due to its tight aluminum housing, unit has high resistance

to environmental conditions and mechanical damages.

Typical applications

- Two measurement channels,

- Build-in temperature sensor,

- Resistance for mechanical damages,

- Aluminum housing.

Pelago M7 Intelligent Logger

The latest development from the pelago stable, being the M7, a versatile, modular, intelligent data logging system with the ability to connect to a type of sensor.

Basic system comprises of:-

Mother board modular bus system and cpu interface, Communication board (LAN, WiFi, 802.11b/g, or LAN, Bluetooth class 1 - 100 Metres) 

Optional modules available for an array of sensors and applications.